USA - English (UK)


Downloads (4)

Upgrade your 3D printer with this high temperature performance hotend or use it as a spare part for your Vertex Nano!

This set includes a 1.75 mm filament nozzle that is fully E3D compatible (all E3D nozzles fit this assembly). It can print PLA or ABS as well as other materials that melt at a maximum temperature of 300°C (*) and at a recommended layer resolution of 0.1 - 0.2 mm.

All parts are open-source, check out what's included below!
Find the assembly manual on (Vertex Nano 3D Printer, chapter 6. Assembling the hotend).

(*) If used with the Vertex Nano (K8600), the maximum nozzle operating temperature is 240 °C.


  • print technology: Fused Filament Fabrication (FFF)
  • layer resolution: 0.1 mm - 0.2 mm (maximum: 0.35 mm - minimum: 0.05 mm)
  • filament diameter: 1.75 mm
  • prints: PLA, ABS and other materials printable at a max. 300°C
  • maximum nozzle operating temperature: 300 °C
    • If used with the Vertex Nano (K8600), the maximum nozzle operating temperature is 240 °C
  • software: view all open source files to check your 3D printer's compatibility
  • open source

What's included

  • heater wire loom with heat sensor

  • spiral wrap, diameter 5 mm, length 50 cm

  • PTFE bowden tube 4 x 2 x 500 mm

  • nozzle 0.35 mm

  • heatbreak

  • hotend heater block

  • hotend heatsink

  • bowden coupler extruder

  • bowden coupler hotend

  • heatsink fixation clip

  • fan (30 x 30 x 10 mm - 80 cm cable)

  • 2 x fan strap

  • 5 x zip ties

  • silicone compound 1.5 g

  • 4 x parker screw 3.5 x 9.5 mm

  • 1 x screw M2.5 x 4

  • 1 x screw M3 x 12

  • 1 x washer M3 3 x 8

Warning: this product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to:

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.
Due to constant product improvements the actual product appearance might differ from the shown images. Product images are for illustrative purposes only.

USA - English (UK)